- Its thermal stability is high.
- It has high oxidation resistance. The closed system must have an expansion tank of suitable capacity open to the atmosphere.
- When oil is first put into the system, care should be taken that there is no foreign matter and especially water in the system.
- It is recommended to clean the system before a complete oil change.
- During the filling of the oil, the air in the system must be removed.
HEAT TRANSFER OIL
LUBRIX HEAT TRANSFER OIL, is a long-lasting heat transfer oil formulated from paraffinic base oils obtained through modern refining processes. Its initial boiling point is above 300°C and it is resistant to oxidation. It can be used in hot oil systems where the general temperature of the oil is 320°C and the film temperature is up to 340°C.
| TEST | UNIT | METHOD | 68 | 100 | 150 | 220 | 320 | 460 |
| Destiny, @15 °C | g/cm 3 | ASTM D 4052 | 0,882 | 0,887 | 0,892 | 0,898 | 0,902 | 0,902 |
| K. Viscosity, @100 °C | cSt | ASTM D 445 | 61,2-74,8 | 90-11 | 135-165 | 198-242 | 288-352 | 414-506 |
| Viscosity Index | ASTM D 2270 | 98 | 95 | 95 | 95 | 93 | 93 | |
| Flash Point | °C | ASTM D 92 | 220 | 226 | 238 | 248 | 250 | 254 |
| Pour Point | °C | ASTM D 97 | -24 | -22 | -12 | -9 | -9 | -9 |
*The stated typical properties repsent the average values.
